![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I'm looking for the small white plastic knobs (cabin air, etc.) for the
panel on a C-172 C model (1962). I've looked on Plane Plastics, Spruce, etc. with no luck. I know this has to be a common problem because they're all cracked and dingy looking, and I've noticed it on other planes as well. By the way, I passed my PPL checkride last weekend--- what a relief! Thanks for any help, Greg M |
#2
|
|||
|
|||
![]()
wrote)
[plastic stuff snipped] By the way, I passed my PPL checkride last weekend--- what a relief! Mr. McGui I want to say one word to you. Just one word. Benjamin: Yes, sir. Mr. McGui Are you listening? Benjamin: Yes, I am. Mr. McGui [Congratulations!!!] The Graduate (1967) Montblack |
#3
|
|||
|
|||
![]()
Hi Greg
I posted the same question and was sent one - Free! These are great groups. Checkride? So tell us about it. What was easy? What was hard? What didn't you expect? What would you pass on to other students? Are you going to stick around? BTW - CONGRATULATIONS - Great Achievement - go celebrate - then come back and give us the whole story. Looking forward to hearing your report, Tony -- Tony Roberts PP-ASEL VFR OTT Night Cessna 172H C-GICE In article , wrote: I'm looking for the small white plastic knobs (cabin air, etc.) for the panel on a C-172 C model (1962). I've looked on Plane Plastics, Spruce, etc. with no luck. I know this has to be a common problem because they're all cracked and dingy looking, and I've noticed it on other planes as well. By the way, I passed my PPL checkride last weekend--- what a relief! Thanks for any help, Greg M |
#4
|
|||
|
|||
![]()
Plastics
I dunno, get creative. Snoop around on ebay for planes that have ben wrecked and bought for parts, contact the winning bidder, see if they will sell you the knobs. With all of the hurricane damaged planes, there has to be a good supply of quality used parts like these sitting around somewhere. Know anybody in insurance? What do they do with these planes that are totaled? "Montblack" wrote in message ... wrote) Mr. McGui I want to say one word to you. Just one word. Benjamin: Yes, sir. Mr. McGui Are you listening? Benjamin: Yes, I am. Mr. McGui [Congratulations!!!] The Graduate (1967) Montblack |
#5
|
|||
|
|||
![]()
Tony,
Thanks for your response and the others so far. My checkride was easier than I expected. Not because it was short or less thorough, but because I had created scenarios in my mind of an examiner asking questions about some fine detail that I forgot, or that I would make some stupid mistake while flying, like forgetting to make clearing turns or something. It turned out that once I got into it the examiner was just a regular guy, imagine that! I had no problem with the oral or practical once I just relaxed and treated the oral like I was having a discussion with another pilot, and the flight like I was flying with my instructor. It really is true that the examiner doesn't expect you to be perfect, and he actually takes the opportunity to teach. The parts I didn't expect were having to go do touch & goes at a large (class Charlie) airport. Luckily the cross country flight plan he had me prepare took me near this airspace and I had all the frequencies handy. The other thing was the "simulated" emergency landing, we were flying along at about 2000' AGL when he pulled my throttle and informed me we had lost power. I set my glide speed and did the usual engine failure checklist. I had picked out a landing site and circled around it, lining up perfectly for final at my desired airspeed. The site I had picked was a grassy field about 100 feet wide and around 2500 feet long lined on each side by trees, and had an uphill slope in the other direction (I was landing uphill). As I got lower I kept waiting for the examiner to have me perform a go-around. I got lower, and lower, and lower. Finally I said "are we going in here?" and he said "yep, we're going in here". Now, at this point I have to make a decision. As the pilot of this airplane I have the responsibility to decide if it is actually safe to land, or if I am going to ignore what he is saying and perform a go-around anyway. Luckily I didn't have to make that decision because he then told me this was a private turf strip that he was familiar with, and that he would help me if I needed it. I got it landed and stopped in a fairly short distance (my home airport runway is only 2550). I taxied uphill and used short field takeoff technique. I was surprised at how little distance it took to get off the ground with the help of the slope, and my main focus was trying not to drift one way or the other due to the trees. After that he had me do the usual maneuvers and some soft field takeoff and landings back at his home airport, and that was it. I think if I had anything to tell other students it would be that the checkride, like any other big, stressful event in life, turns out to be much less of a big deal than we anticipate. Greg M |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Interior Replacement Project - Day 30 | Mike Spera | Owning | 9 | April 29th 05 08:05 AM |
Fueling from Plastic Containers and Blowing yourself up? | Juaquin Murrieta | Home Built | 23 | April 11th 05 04:27 PM |
FS: Revell Monogram "F-14A Tomcat" Plastic Model Kit (1:48 Scale) | J.R. Sinclair | Aviation Marketplace | 0 | August 16th 04 05:59 AM |
KX170B/175B replacement knobs | Lane_Pilot | Aviation Marketplace | 0 | April 25th 04 07:50 PM |
Repairing Plastic | Jay Honeck | Owning | 5 | February 2nd 04 09:20 PM |