![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hi,
Has anyone successfully found or worked out a way to get one of the great little handheld Vertex Standard (previously Yaesu) VX150 or VX210 radios to work with a mini in-ear headset and boom mic with a PTT button, like this one, http://www.planetheadset.com/vertex-...es.php#samurai I figure this would be perfect for my glider flights and the cost is reasonable.. I bought one, but in spite of it having the correct 1 plug connection specified for a Yaesu radio, all I can do is hear the radio, the PTT does not work. I called in at a ham Radio ouotlet and they mumbled something about microphone/headset impedances being diffecent for their aviation vs. non-aviation equipment, but I wasn't convinced. Has anyone got a nice solution for a glider where full headsets would be overkill ? Peter |
#2
|
|||
|
|||
![]() I bought one, but in spite of it having the correct 1 plug connection specified for a Yaesu radio, all I can do is hear the radio, the PTT does not work. I called in at a ham Radio ouotlet and they mumbled something about microphone/headset impedances being diffecent for their aviation vs. non-aviation equipment, but I wasn't convinced. The impedance thing is actually true...Had similar problem using an ICOM "non-aviation" Speaker-mic for an aviation HT...Worked mechanically but weak TX/RX audio. Hated to cough up twice as much for an aviation spkr/mic, but it worked great! I suspect the plug may not be 'deep enough' either. Those use the screw-in plug? Maybe use the aviation headset adapter with the Vertex with a lightweight aviation headset? Nice but more $$ tho... see the ones at the bottom of page: http://www.marvgolden.com/headsets/TELEX.HTM --Don Glider flyer wannabe...maybe next year! Don Byrer Radar Tech & Smilin' Commercial Pilot Guy Amateur Radio KJ5KB kj5kb-at-hotmail.com "I have slipped the surly bonds of earth; now if I can just land without bending the gear..." "Watch out for those doves...smack-smack-smack-smack..." |
#3
|
|||
|
|||
![]()
Got one from Radio Shack that works with my ICOM.
Mike Peter wrote: Hi, Has anyone successfully found or worked out a way to get one of the great little handheld Vertex Standard (previously Yaesu) VX150 or VX210 radios to work with a mini in-ear headset and boom mic with a PTT button, like this one, http://www.planetheadset.com/vertex-...es.php#samurai I figure this would be perfect for my glider flights and the cost is reasonable.. I bought one, but in spite of it having the correct 1 plug connection specified for a Yaesu radio, all I can do is hear the radio, the PTT does not work. I called in at a ham Radio ouotlet and they mumbled something about microphone/headset impedances being diffecent for their aviation vs. non-aviation equipment, but I wasn't convinced. Has anyone got a nice solution for a glider where full headsets would be overkill ? Peter |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
I Hate Radios | Ron Wanttaja | Home Built | 9 | June 6th 05 05:39 PM |
Dennis Fetters Mini 500 | EmailMe | Home Built | 70 | June 21st 04 09:36 PM |
FA OLD AIRCRAFT RADIO TRANSMITTER STANDARD RADIO | Ron | Restoration | 0 | October 26th 03 12:02 AM |
CAD outline of Rans S6S instrument panel? | Rob Turk | Home Built | 2 | October 21st 03 09:27 PM |
Vertex Standard 700 opinions?? | EGWW | Owning | 3 | July 15th 03 01:43 PM |