Task declaration validity with 302 for US state records

Hello Again,

Having used a 302 in all my record attempts, have some experience with the unit. Uploading a declaration, have had no problems doing it with either the Cambridge utility software via an IPAQ or similar ancient device. Also have uploaded with SeeYouMobile, ConnectMe, and SeeYouMobile on an Oudie. All had no problems with the declaration upload. Occasionally, getting a pilots name, or an N number in was a problem, but if it shows on a line other than what you thought you were entering, thats OK, as long as its in the declaration portion.

However, downloading the raw file from the 302 for record purposes can be problematic. The only software that had no issue in this regard was the 302 utility. Using that, always got a good file for records and OLC. However, if downloaded with SeeYouMobile or other software, always seemed to get the dreaded "invalid file" message from OLC, or a bad file security check when running the security checks that are required. If that happened, the 302 has retained the original file, and I always went back (or had the OO do it) and use only the Cambridge utility for another download of the same file.

Hope this helps some...

Linwood